This is for Self Clean or Cross Belt Electro-Magnetic Separator
The Cross Belt Magnetic Separators provide a continuous and automatic discharge of collected tramp iron. It is suspended over conveyer with a powerful Rectangular Magnet which pulls out tramp iron. A cleated self cleaning belt discharges the tramp iron into a suitable receptacle, placed at the side of the conveyer away from the material in process.
As the automatic suspended Magnet never requires cleaning, there is no need to stop the conveyer. This is useful where the Magnet has to remove large quantities of tramp iron from the material to be cleaned. There is no danger of tramp iron dropping back onto the conveyer and re-contaminating the material in process. The Cross Belt Magnetic Separator automatically discharges removed iron at right angles to the main conveyer travel. This separator can be installed anywhere along the conveyer line, and in some applications at an angle over the material discharge.
The Cross Belt Magnetic Separators provide a continuous and automatic discharge of collected tramp iron. It is suspended over conveyer with a powerful Rectangular Magnet which pulls out tramp iron. A cleated self cleaning belt discharges the tramp iron into a suitable receptacle, placed at the side of the conveyer away from the material in process.
As the automatic suspended Magnet never requires cleaning, there is no need to stop the conveyer.This is useful where the Magnet has to remove large quantities of tramp iron from the material to be cleaned. There is no danger of tramp iron dropping back onto the conveyer and recontaminating the material in process.The Cross Belt Magnetic Separator automatically discharges removed iron at right angles to the main conveyer travel. This separator can be installed anywhere along the conveyer line, and in some applications at an angle over the material discharge
Standard Model Sizes
| Model No | L x W x H x C | Belt. Wt. | Est. Wt. (KGs) | Watts | Pulleys (H.P) |
|---|---|---|---|---|---|
|
CBS 4242 |
108 X 72 X 40 |
42 |
4890 |
5.06 |
3 |
|
CBS 4848 |
112 X 64 X 40 |
48 |
5289 |
6.02 |
3 |
|
CBS 4848 |
112 X 64 X 40 |
48 |
5289 |
6.02 |
3 |
|
CBS 5454 |
118 X 86 X 42 |
54 |
6686 |
8.17 |
5 |
|
CBS 6060 |
125 X 92 X 46 |
60 |
9779 |
12.47 |
5 |
Standard Features :
- 5 HP motor ( models 4848 & larger )
- 3HP motor ( models 4242 & smaller )
- Shaft mounted Speed Reducers
- Self-Aligning regreasable pillow block bearings
- 3-ply non-endless rubber belt with vulcanized 3" rubber cleats
- 2 & 4 pulley designs
- V-belt drive
- Stainless Steel impact plate
Optional Features :
- Explosion Proof Motor
- Zero Speed Switch
- Special belts
- NEMA 4 or 12 enclosure
- Non-standard vloage
- Manganese Impact Plate
